How Important is a Level Door Sill?


it’s not that big of a deal… is it?

Let’s Take a Look at Why a Level Door Sill is So Important.


It’s a Big Deal…

This is a question that most people don’t think about before beginning a door installation, but it might be the most important step to take. Installing a door with a level door sill is like building a house on a level foundation, you have to start right to end right.

picture-correct-door-sill-vs-an-incorrect-door-sill

As you can see in the picture above, if you don’t start with a level sill, it’s practically impossible to end up with a good result to your door installation. The sill is the door’s foundation, if it is out of level; the problems compound over the height of the door and become much more difficult to troubleshoot.

A Level Foundation is the Key Building Block to Any Structure.

Now that we know we need a level sill, it’s easy right?  Well in the real world, you’ll find most construction sites don’t offer a perfectly level sill area in the rough framing.  In fact, it’s very uncommon to find a perfect RO (rough opening) with a perfect sill. So what do you do?  You fix it!

Take the time

It’s important to use a straight edge level long enough to run the entire length of the door sill to make sure that the entire span is level and without dips or rises. A dip or a rise in the sill must be fixed before beginning the door installation.

One of the best methods we’ve come across to fix a dip or a rise in the door sill is to use strips of Ice and Water shield (found on most jobsites as a roofing underlayment) or asphalt shingles to build up the rough framing in order to create a level door sill.  Depending on the thickness you need, the strips are easy to cut and stay nicely in place where you need them during the door’s installation and afterwards.

Fix Any Problems Before Moving Forward with Installation!

By taking the time to complete this small step, you will find that many common door installation problems disappear when you start with a level sill!

DID YOU LIKE THIS ARTICLE?

DID YOU LIKE THIS ARTICLE?

Here are some more you might be interested in! We’ve taken everything we’ve learned about door installation and wrote it down for your use

Read more

5 mistakes you might be making installing a door, 5 steps how you might plumb a wall frame, check door frame for plumb, checking to see if door frame is racked, common door installation problems and fixes, common errors made during installing a door, diy installing doors uneven, door, door errors, door frame not level will the door have issues shutting, door hanging mistakes, door installation not going right, door installation on a crooked wall, door installation problems, door problems, door sill, doors, doors not installed plumb, fixing out of plumb door, hanging a door can get it level but can get it plumb, hanging a door frame, hanging a door it's crooked, hanging a door on a crooked wall, hanging a door on eneven floor, hanging door wall out of plumb, hanging doors in a crooked wall, how do i check if a door is hung correctly, how do you hang an inward swing door with uneven floor, how to check if a door is plumb, how to check if newly-hung door is plumb, how to check if your door is plumb, how to determine if a french door is plumb, how to fix a door that is not plumb, how to fix a door that was installed wrong, how to frame an uneven door, how to get a door plumb, how to hang a door in a crooked frame, how to hang a door in a crooked opening, how to hang a door on a crooked wall, how to install a door, how to install a prehung door, how to install door on a warped floor, how to install prehung door uneven wall, how to level a commercial door, how to level a door, how to level a door jamb, how to level a door while installing, how to make door reveal, how to make sure both door jambs are parallel, how to plumb a door, how would you know if a door is plumb, hung door under tension, improperly installed door on house, install door with uneven frame, installing a door, installing a door on uneven floor, installing an out of plumb door, installing door and its not straight, installing door in crooked frame, installing entry door mistakes, interior door improperly installed, interior door not plumb, level sill, making a door plumb, mistakes when hanging doors, new doors not plumb, new interior doors uneven, out of plumb door frame, out of plumb walls are a problem?, poorly installed door, pre hung door installation problems, prehung door has tilted backward, prehung door not plumb, reveal crooked door, should exterior doors alway be installed plumb, slab door installation is crooked, trouble shooting replacing a door, troubleshooting hanging a door, troubleshooting prehung door installation, what does make sure door is plumb mean, what if a door is installed unevenly, what is a plumb door, what to do if a prehung door is not straight, what to use when leveling the big door to a small frame, when a door is not plumb, when framing in a new door how do you leave a reveal, where to start leveling a door jamb new install


JENTRA

One thing has stood out clearly to us in our combined 15 years of experience in both the sales and installation of residential/commercial doors…. the lack of accurate door installation happening in the field. This installation process has been virtually the same since pre-hanging started in the 1960’s and yet it’s not uncommon to find a poorly installed door on most jobsites. It’s time to take a new look at this.

Comment

  • Grеat post. I was checking constantly this blog ɑnd I’m impressed!
    Very heⅼpful information specially the lɑst part 🙂 I сare for ѕuch information much.

    І was looking for this certaіn info for а long time.
    Thank you and best of luck.

Leave a Reply

SHIMPAD™ DOOR SPACERS

SHIMPAD™ DOOR SPACERS

As low as $.59 each

Learn More

PRO-TECT™ DOOR PLUG

PRO-TECT™ DOOR PLUG

Starting at $.89 each

Learn More

THE ORANGE™ DOOR PLUG

THE ORANGE™ DOOR PLUG

As low as $.36 each

Learn More

PRO-LEVEL™ SYSTEM

PRO-LEVEL™ SYSTEM

Starting at $7.95 each

Learn More

JENTRA™

794 32nd Ave NW
Backus, MN 56435
(855) 947-4300
sales@jentratools.com

Mon-Sat: 8am - 5pm

Sign up to Our Newsletter
and Never Miss a Deal


Copyright 2021 JENTRA™. All Rights Reserved.  Tools are sold under US Patents 8,677,636 and 9,482,016.