The Ups and Downs of a Door Shim


a door shim has a top?

The Ups and Downs of a Door Shim


The pitch of the door shim is important!

Did you know that door shims have a top and a bottom, and that if you put them in the wrong way they don’t work? Let’s take a look at this.

A Shim Has A Taper for a Reason

To start, we’ll call the thicker portion of the shim the top and the thinner end the bottom.  The taper this creates is designed not only to help make up various gaps when combined with another shim, but it also sets the “projection” of the door. Take a look at the picture below.

All bound up?

Have you ever tried to shut a door that feels like it is binding when you try to close it the last few inches? More than likely, this was caused by putting the shims in the wrong direction creating the bad projection and the door hinges to bind.

The Taper Helps the Door to Swing One Way or the Other

By correctly placing a shim at each hinge, you will help the door easily close all the way. It’s all about the top and bottom when it comes to a door shim.

DID YOU LIKE THIS ARTICLE?

DID YOU LIKE THIS ARTICLE?

Here are some more you might be interested in! We’ve taken everything we’ve learned about door installation and wrote it down for your use

Read more

5 mistakes you might be making installing a door, 5 steps how you might plumb a wall frame, can a prehung door get warped, check door frame for plumb, checking to see if door frame is racked, common door installation problems and fixes, common errors made during installing a door, diy installing doors uneven, do i have to shim a prehung door, does top of door need shims, door, door errors, door frame not level will the door have issues shutting, door hanging mistakes, door hinge improper installation, door hinges on backwards, door installation, door installation not going right, door installation on a crooked wall, door installation problems, door problems, door shim, doors not installed plumb, fixing out of plumb door, hanging a door can get it level but can get it plumb, hanging a door frame, hanging a door it's crooked, hanging a door on a crooked wall, hanging door wall out of plumb, hanging doors in a crooked wall, how do i check if a door is hung correctly, how to check if a door is plumb, how to check if newly-hung door is plumb, how to check if your door is plumb, how to determine if a french door is plumb, how to fix a door that is not plumb, how to fix a door that was installed wrong, how to frame an uneven door, how to get a door plumb, how to hang a door in a crooked frame, how to hang a door in a crooked opening, how to hang a door on a crooked wall, how to hang a prehung interior door with shims, how to install a door, how to install a prehung door, how to install prehung door uneven wall, how to level a door, how to level a door jamb, how to level a door while installing, how to make door reveal, how to make sure both door jambs are parallel, how to plumb a door, how to shim a door, how would you know if a door is plumb, hung door under tension, if a french door is installed backwards, improperly installed door on house, install door with uneven frame, installing a door, installing an out of plumb door, installing door and its not straight, installing door in crooked frame, installing entry door mistakes, interior door improperly installed, interior door not plumb, making a door plumb, middle hinge door reveal, mistakes when hanging doors, new doors not plumb, new interior doors uneven, out of plumb door frame, out of plumb walls are a problem?, poorly installed door, poorly shimmed door, pre hung door installation problems, prehung door has tilted backward, prehung door not plumb, pressure on top door hinge, reveal crooked door, shimming a door, shimming a improperly installed door, should exterior doors alway be installed plumb, slab door installation is crooked, trouble shooting replacing a door, troubleshooting hanging a door, troubleshooting prehung door installation, what if a door is installed unevenly, what is door reveal and its uses, what is the correct way to install hinges, what to do if a prehung door is not straight, when a door is not plumb, where to start leveling a door jamb new install, why are three door hinges not even


JENTRA

One thing has stood out clearly to us in our combined 15 years of experience in both the sales and installation of residential/commercial doors…. the lack of accurate door installation happening in the field. This installation process has been virtually the same since pre-hanging started in the 1960’s and yet it’s not uncommon to find a poorly installed door on most jobsites. It’s time to take a new look at this.

SHIMPAD™ DOOR SPACERS

SHIMPAD™ DOOR SPACERS

As low as $.59 each

Learn More

PRO-TECT™ DOOR PLUG

PRO-TECT™ DOOR PLUG

Starting at $.89 each

Learn More

THE ORANGE™ DOOR PLUG

THE ORANGE™ DOOR PLUG

As low as $.33 each

Learn More

PRO-LEVEL™ SYSTEM

PRO-LEVEL™ SYSTEM

Starting at $7.95 each

Learn More

JENTRA™

794 32nd Ave NW
Backus, MN 56435
(855) 947-4300
sales@jentratools.com

Mon-Sat: 8am - 5pm

Sign up to Our Newsletter
and Never Miss a Deal


Copyright 2021 JENTRA™. All Rights Reserved.  Tools are sold under US Patents 8,677,636 and 9,482,016.